Item # 
Item Name 
Type 
Description 
Weight 
List Price 
Your Cost 
Add To Cart/Request Quote 

1G1911  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

1G1912  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

1U1545  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625” thick, 14.5” wide and 27” in length. It takes 7 of a 1 1/4” X 4 1/4” (125X425) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 140 lb63.5 kg  N/A 388.29  $349.46 
Add To Cart

1U1546  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625” thick, 14.5” wide and 27” in length. It takes 7 of a 1 1/4” X 4 1/4” (125X425) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the bolt holes, and 3.125” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 140 lb63.5 kg  N/A 388.29  $349.46 
Add To Cart

2C1847  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole. Use Item # 3G8296  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

2C2301  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4197 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

2C2302  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4196 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

2C2328  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole. Use Item # 3G8295  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

2C2384  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844LH  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

2C2385  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843RH  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

2J2571  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

2J2572  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

3B4757  N/A GRADER END BIT  N/A END BIT  N/A Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.375” in length. It takes 5 of a 5/8” X 2 1/4”(625X225) plow bolt and 5 of a 5/8”(625 HEX NUT) hex nut. Use Item # 7D2052  N/A 16.75 lb7.6 kg  N/A 68.29  $61.46 
Add To Cart

3G4285  N/A LEVEL CUT END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 or a D5 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75” thick, 8” wide and 16.75” in length. It takes 4 of a 3/4” X 2 1/2”(750X250) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 3.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 26.46 lb12 kg  N/A 58.92  $53.03 
Add To Cart

3G6395  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375” thick, 8” wide and 20.25” in length. It takes 3 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 3 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 7.13” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 56.44 lb25.6 kg  N/A 180.58  $162.52 
Add To Cart

3G6993  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1” thick, 6.25” wide and 13.5625” in length. It takes 2 of a 1” X 2 3/4” (100X275) plow bolt and 2 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.44” from center to center of the bolt holes, and 5.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T8091  N/A 22.05 lb10 kg  N/A 85.55  $77.00 
Add To Cart

3G8277  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625” thick, 13” wide and 22” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.5” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 98 lb44.45 kg  N/A 216.88  $195.19 
Add To Cart

3G8278  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625” thick, 13” wide and 22” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.5” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 98 lb44.45 kg  N/A 216.88  $195.19 
Add To Cart

3G8281  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625” thick, 16” wide and 27.5” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 152 lb68.95 kg  N/A 393.82  $354.44 
Add To Cart

3G8282  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625” thick, 16” wide and 27.5” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 152 lb68.95 kg  N/A 393.82  $354.44 
Add To Cart

3G8283  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 8E4197  N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

3G8284  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 8E4196  N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

3G8285  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625” thick, 13” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 105 lb47.63 kg  N/A 247.44  $222.70 
Add To Cart

3G8286  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625” thick, 13” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 105 lb47.63 kg  N/A 247.44  $222.70 
Add To Cart

3G8287  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.625” thick, 13” wide and 22” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 105 lb47.63 kg  N/A 237.4  $213.66 
Add To Cart

3G8288  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.625” thick, 13” wide and 22” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 105 lb47.63 kg  N/A 237.4  $213.66 
Add To Cart

3G8289  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.375” thick, 16” wide and 27.5” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 128 lb58.06 kg  N/A 393.82  $354.44 
Add To Cart

3G8290  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.375” thick, 16” wide and 27.5” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 128 lb58.06 kg  N/A 393.82  $354.44 
Add To Cart

3G8291  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.375” thick, 15.5” wide and 24” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 104 lb47.17 kg  N/A 299.82  $269.84 
Add To Cart

3G8292  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.375” thick, 15.5” wide and 24” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 104 lb47.17 kg  N/A 299.82  $269.84 
Add To Cart

3G8293  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is .875” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 2 3/4”(875X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 66.14 lb30 kg  N/A 154.26  $138.83 
Add To Cart

3G8294  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is .875” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 2 3/4”(875X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 66.14 lb30 kg  N/A 154.26  $138.83 
Add To Cart

3G8295  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole.  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

3G8296  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole.  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

3G8297  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 10.375” wide and 15.75” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.58 lb17.5 kg  N/A 90.34  $81.31 
Add To Cart

3G8298  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 10.375” wide and 15.75” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.58 lb17.5 kg  N/A 90.34  $81.31 
Add To Cart

3G8299  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.25” thick, 13” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.5” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 76 lb34.47 kg  N/A 172.66  $155.39 
Add To Cart

3G8300  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.25” thick, 13” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.5” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 76 lb34.47 kg  N/A 172.66  $155.39 
Add To Cart

3G8301  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9  100x400 plow bolts and 9  100 hex nuts  N/A 57.54 lb26.1 kg  N/A 222.44  $200.20 
Add To Cart

3G8302  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9  100x400 plow bolts and 9  100 hex nuts  N/A 57.54 lb26.1 kg  N/A 222.44  $200.20 
Add To Cart

3G8315  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.25” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 64.15 lb29.1 kg  N/A 195.1  $175.59 
Add To Cart

3G8316  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.25” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 64.15 lb29.1 kg  N/A 195.1  $175.59 
Add To Cart

3G8317  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1.25” thick, 13” wide and 21.625” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 76 lb34.47 kg  N/A 178.17  $160.35 
Add To Cart

3G8318  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1.25” thick, 13” wide and 21.625” in length. It takes 7 of a 1” X 3 1/2” (100X350) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 76 lb34.47 kg  N/A 178.17  $160.35 
Add To Cart

3G8319  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 10.25” wide and 17.625” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

3G8320  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 10.25” wide and 17.625” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

3G8321  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1” thick, 10” wide and 17.5” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 1.875” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.58 lb17.5 kg  N/A 92.48  $83.23 
Add To Cart

3G8322  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1” thick, 10” wide and 17.5” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 1.875” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.58 lb17.5 kg  N/A 92.48  $83.23 
Add To Cart

3G9512  N/A END BIT RH OR LH  N/A CUTTING EDGE  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375” thick, 6.6875” wide and 19.625” in length. It takes 3 of a 1” X 3” (100X300) plow bolt and 3 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.69” from center to center of the bolt holes, and 7.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T8101  N/A 48.94 lb22.2 kg  N/A 135.23  $121.71 
Add To Cart

4J8261  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 15" long, 8" wide and 3/4" thick; takes 8  750x300 plow bolts and 8  750 hex nuts  N/A 23.36 lb10.6 kg  N/A 86.62  $77.96 
Add To Cart

4J8262  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 15" long, 8" wide and 3/4" thick; takes 8  750x300 plow bolts and 8  750 hex nuts  N/A 23.36 lb10.6 kg  N/A 86.62  $77.96 
Add To Cart

4J8843  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

4J8844  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

4T2436  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1” thick, 6.25” wide and 13.5625” in length. It takes 2 of a 1” X 2 3/4” (100X275) plow bolt and 2 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.44” from center to center of the bolt holes, and 5.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T8091  N/A 22.05 lb10 kg  N/A 85.55  $77.00 
Add To Cart

4T2444  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1” thick, 6.25” wide and 13.5625” in length. It takes 2 of a 1” X 2 3/4” (100X275) plow bolt and 2 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.44” from center to center of the bolt holes, and 5.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T8091  N/A 22.05 lb10 kg  N/A 85.55  $77.00 
Add To Cart

4T3041  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 8” wide and 14.9375” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 1.93” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.36 lb17.4 kg  N/A 73.29  $65.96 
Add To Cart

4T3042  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 8” wide and 14.9375” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 1.93” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 38.36 lb17.4 kg  N/A 73.29  $65.96 
Add To Cart

4T3043  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 12” in length. It takes 3 of a 5/8” X 2 1/4”(625X225) plow bolt and 3 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 17.20 lb7.80 kg  N/A 45.69  $41.12 
Add To Cart

4T3044  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 12” in length. It takes 3 of a 5/8” X 2 1/4”(625X225) plow bolt and 3 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 17.20 lb7.80 kg  N/A 45.69  $41.12 
Add To Cart

4T3045  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 8” wide and 14 3/4” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center of the bolt holes.  N/A 28.6 lb12.97 kg  N/A 55.76  $50.18 
Add To Cart

4T3046  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 8” wide and 14 3/4” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center of the bolt holes.  N/A 28.6 lb12.97 kg  N/A 55.76  $50.18 
Add To Cart

4T3049  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 3/4” thick, 8” wide and 14” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center of the bolt holes.  N/A 19.9 lb9.03 kg  N/A 57.49  $51.74 
Add To Cart

4T3050  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 3/4” thick, 8” wide and 14” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center of the bolt holes.  N/A 19.9 lb9.03 kg  N/A 57.49  $51.74 
Add To Cart

4T3051  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6  625x300 plow bolts and 6  625 hex nuts  N/A 20.28 lb9.2 kg  N/A 75.35  $67.82 
Add To Cart

4T3052  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 13 1/2" long, 8" wide and 3/4" thick; takes 6  625x300 plow bolts and 6  625 hex nuts  N/A 20.28 lb9.2 kg  N/A 75.35  $67.82 
Add To Cart

4T4435  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 8” wide and 16” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 31.31 lb14.2 kg  N/A 75.59  $68.03 
Add To Cart

4T4436  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 8” wide and 16” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 31.31 lb14.2 kg  N/A 75.59  $68.03 
Add To Cart

4T4454  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1 1/4” thick, 10 3/4” wide and 17 1/2” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.188” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.875” from center to center of the bolt holes.  N/A 54 lb24.49 kg  N/A 133.6  $120.24 
Add To Cart

4T4455  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1 1/4” thick, 10 3/4” wide and 17 1/2” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.188” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.875” from center to center of the bolt holes.  N/A 54 lb24.49 kg  N/A 133.6  $120.24 
Add To Cart

4T5407  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 and D5 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1” thick, 10” wide and 21” in length. It takes 4 of a 3/4” X 2 1/2”(750X250) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 3.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 54.01 lb24.5 kg  N/A 120.78  $108.70 
Add To Cart

4T5408  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 and D5 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1” thick, 10” wide and 21” in length. It takes 4 of a 3/4” X 2 1/2”(750X250) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 3.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 54.01 lb24.5 kg  N/A 120.78  $108.70 
Add To Cart

4T6229  N/A LEVEL CUT END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75” thick, 6.5” wide and 13” in length. It takes 3 of a 5/8” X 2 ¼” (625X225) plow bolt and 3 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 4” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 15.87 lb7.2 kg  N/A 41.66  $37.49 
Add To Cart

4T6391  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1.125” thick, 13” wide and 19.95” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.94” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 71 lb32.21 kg  N/A 145.17  $130.65 
Add To Cart

4T6392  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1.125” thick, 13” wide and 19.95” in length. It takes 7 of a 1” X 3 3/4” (100X375) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 6.94” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 71 lb32.21 kg  N/A 145.17  $130.65 
Add To Cart

4T6505  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 10” wide and 18” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 44 lb19.96 kg  N/A 102.84  $92.56 
Add To Cart

4T6506  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 10” wide and 18” in length. It takes 7 of a 7/8” X 3”(875X300) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.875” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3” from center to center of the bolt holes.  N/A 44 lb19.96 kg  N/A 102.84  $92.56 
Add To Cart

4T8091  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1” thick, 6.25” wide and 13.5625” in length. It takes 2 of a 1” X 2 3/4” (100X275) plow bolt and 2 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.44” from center to center of the bolt holes, and 5.56” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 22.05 lb10 kg  N/A 85.55  $77.00 
Add To Cart

4T8101  N/A END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit. This is a level cut right hand or left hand end bit that is 1.375” thick, 6.6875” wide and 19.625” in length. It takes 3 of a 1” X 3” (100X300) plow bolt and 3 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 2.69” from center to center of the bolt holes, and 7.13” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 48.94 lb22.2 kg  N/A 135.23  $121.71 
Add To Cart

5A4101  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole. Use Item # 3G8296  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

5A7881  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 17" long, 8" wide and 3/4" thick; takes 8  750x300 plow bolts and 8  750 hex nuts; Use Item # 3G8319  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

5A7882  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 17" long, 8" wide and 3/4" thick; takes 8  750x300 plow bolts and 8  750 hex nuts; Use Item # 3G8320  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

5J6939  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 8” wide and 14.9375” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 1.93” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T3041  N/A 38.36 lb17.4 kg  N/A 73.29  $65.96 
Add To Cart

5J6940  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5A Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 8” wide and 14.9375” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 1.93” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T3042  N/A 38.36 lb17.4 kg  N/A 73.29  $65.96 
Add To Cart

5J6941  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut right hand end bit that is .75” thick, 8” wide and 12” in length. It takes 3 of a 5/8” X 2 1/4”(625X225) plow bolt and 3 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T3043  N/A 17.20 lb7.80 kg  N/A 45.69  $41.12 
Add To Cart

5J6942  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozer. This is a level cut left hand end bit that is .75” thick, 8” wide and 12” in length. It takes 3 of a 5/8” X 2 1/4”(625X225) plow bolt and 3 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T3044  N/A 17.20 lb7.80 kg  N/A 45.69  $41.12 
Add To Cart

5J8767  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

5J8768  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

5J9627  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is .875” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 2 3/4”(875X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8293  N/A 66.14 lb30 kg  N/A 154.26  $138.83 
Add To Cart

5J9628  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is .875” thick, 13.125” wide and 21.625” in length. It takes 7 of a 7/8” X 2 3/4”(875X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8294  N/A 66.14 lb30 kg  N/A 154.26  $138.83 
Add To Cart

6J0275  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 10.25” wide and 17.625” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8319  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

6J0276  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 10.25” wide and 17.625” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8320  N/A 39.68 lb18 kg  N/A 99.35  $89.42 
Add To Cart

6J0277  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1” thick, 10” wide and 17.5” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 1.875” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8321  N/A 38.58 lb17.5 kg  N/A 92.48  $83.23 
Add To Cart

6J0278  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D4 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1” thick, 10” wide and 17.5” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 1.875” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8322  N/A 38.58 lb17.5 kg  N/A 92.48  $83.23 
Add To Cart

6J0893  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped right hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole. Use Item # 3G8295  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

6J0894  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a Caterpillar Wheel Dozer/Compactor. This is a hot cupped left hand end bit that is 1” thick, 10.3” wide and 15.44” in length. It takes 6 of a 5/8” X 2 1/4”(625X225) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 4” from center to center and 2” when measured from the edge of the bucket to the center of the first hole. Use Item # 3G8296  N/A 36 lb16.33 kg  N/A 86.5  $77.85 
Add To Cart

6J0895  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1” thick, 10.375” wide and 15.75” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8297  N/A 38.58 lb17.5 kg  N/A 90.34  $81.31 
Add To Cart

6J0896  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1” thick, 10.375” wide and 15.75” in length. It takes 6 of a 3/4” X 2 1/4”(750X225) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.5” from center to center of the bolt holes, and 2” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 3G8298  N/A 38.58 lb17.5 kg  N/A 90.34  $81.31 
Add To Cart

6Y4277  N/A RH END BIT  N/A END BIT  N/A Caterpillar style bolt on level cut end RH end bit for a D8 Caterpillar Bulldozer. This is 1.5” thick, 13” wide and 13.3” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.69” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 107.70 lb48.85 kg  N/A 269.27  $242.34 
Add To Cart

6Y4278  N/A LH END BIT  N/A END BIT  N/A Caterpillar style bolt on level cut end LH end bit for a D8 Caterpillar Bulldozer. This is 1.5” thick, 13” wide and 13.3” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.69” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 107.70 lb48.85 kg  N/A 269.27  $242.34 
Add To Cart

6Y4410  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.25” thick, 12” wide and 19.5” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 59.52 lb27 kg  N/A 130.49  $117.44 
Add To Cart

6Y4411  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D6 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.25” thick, 12” wide and 19.5” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 59.52 lb27 kg  N/A 130.49  $117.44 
Add To Cart

6Y5839  N/A ANGLED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled right hand end bit that is .63” thick, 6.5” wide and 13.88” in length. It takes 3 of a 5/8” X 2 ¼” (625X225) plow bolt and 3 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 4” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 13.45 lb6.1 kg  N/A 38.35  $34.52 
Add To Cart

6Y5840  N/A ANGLED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D3, D4 and D5 Caterpillar Bulldozers. This is an angled left hand end bit that is .63” thick, 6.5” wide and 13.88” in length. It takes 3 of a 5/8” X 2 ¼” (625X225) plow bolt and 3 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 4” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 13.45 lb6.1 kg  N/A 38.35  $34.52 
Add To Cart

7D2052  N/A GRADER END BIT  N/A END BIT  N/A Caterpillar style bolt on right hand or left hand grader end bits for a 112 Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.375” in length. It takes 5 of a 5/8” X 2 1/4”(625X225) plow bolt and 5 of a 5/8”(625 HEX NUT) hex nut.  N/A 16.75 lb7.6 kg  N/A 68.29  $61.46 
Add To Cart

7J3463  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 8E4197  N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

7J3464  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 23" long, 12 1/8" wide, and 2" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 8E4196  N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

7T4096  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2 1/4” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4542 
N/A 279.98 lb127 kg  N/A 787.04  $708.34 
Add To Cart

7T4097  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2 1/4” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4541 
N/A 279.98 lb127 kg  N/A 787.04  $708.34 
Add To Cart

7T4687  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4199 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

7T4688  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4198 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

7T6587  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit, 7/8" bolt holes; Use Item # 4J8843  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

7T6588  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit, 7/8" bolt holes; Use Item # 4J8844  N/A 74.96 lb34 kg  N/A 268.66  $241.79 
Add To Cart

7T9089  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.625” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4193 
N/A 105 lb47.63 kg  N/A 0  $0.00 
Add To Cart

7T9090  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.625” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4194 
N/A 105 lb47.63 kg  N/A 0  $0.00 
Add To Cart

7T9092  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that takes 7  100x325 plow bolts and 7  100 hex nuts; Use Item # 8E4538  N/A 169 lb76.66 kg  N/A 376.3  $338.67 
Add To Cart

7T9093  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that takes 7  100x325 plow bolts and 7  100 hex nuts; Use Item # 8E4537  N/A 169 lb76.66 kg  N/A 376.3  $338.67 
Add To Cart

8E4193  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 1.625” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 127.87 lb58 kg  N/A 286.23  $257.61 
Add To Cart

8E4194  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 1.625” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.75” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 127.87 lb58 kg  N/A 286.23  $257.61 
Add To Cart

8E4196  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

8E4197  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

8E4198  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

8E4199  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

8E4537  N/A HOT CUPPED END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 2” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.625” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 169 lb76.66 kg  N/A 376.3  $338.67 
Add To Cart

8E4538  N/A HOT CUPPED END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D8 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 2” thick, 15.875” wide and 23.5” in length. It takes 7 of a 1” X 3” (100X300) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.625” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3.25” from center to center of the bolt holes.  N/A 169 lb76.66 kg  N/A 376.3  $338.67 
Add To Cart

8E4539  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit for D89 doziers  N/A 157.24 lb71.32 kg  N/A 622.79  $560.51 
Add To Cart

8E4540  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit for D89 doziers  N/A 157.24 lb71.32 kg  N/A 622.79  $560.51 
Add To Cart

8E4541  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2 1/4” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 279.98 lb127 kg  N/A 787.04  $708.34 
Add To Cart

8E4541HDR  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand ribbed end bit, takes 7  125 X 400 plow bolts and 7  125 hex nuts  N/A 284.89 lb129.23 kg  N/A 851.74  $766.57 
Add To Cart

8E4542  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2 1/4” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 279.98 lb127 kg  N/A 787.04  $708.34 
Add To Cart

8E4542HDL  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand ribbed end bit, takes 7  125 X 400 plow bolts and 7  125 hex nuts  N/A 284.89 lb129.23 kg  N/A 851.74  $766.57 
Add To Cart

8E4545  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9  125 X 400 plow bolts and 9  125 hex nuts  N/A 258.82 lb117.4 kg  N/A 1441.36  $1,297.22 
Add To Cart

8E4546  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9  125 X 400 plow bolts and 9  125 hex nuts  N/A 258.82 lb117.4 kg  N/A 1441.36  $1,297.22 
Add To Cart

8E5529  N/A END BIT  N/A END BIT  N/A Caterpillar style bolt on right hand or left hand grader end bits for a 14G Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.25” in length. It takes 5 of a 3/4” X 2 1/2”(750X250) plow bolt and 5 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 1.563” from the edge to the center of the 1^{st} hole, ands 3.781” from the center of the 1^{st} hole to the center of the 2^{nd} hole, and 3.781” from center of the 2^{nd} hole to the center of the 3^{rd} hole.  N/A 18 lb8.16 kg  N/A 83.21  $74.89 
Add To Cart

8E5530  N/A END BIT  N/A END BIT  N/A Caterpillar style bolt on right hand or left hand grader end bits for a 16G Caterpillar Grader. This is a grader end bit that is .75” thick, 6” wide and 17.5” in length. It takes 5 of a 3/4” X 2 1/2”(750X250) plow bolt and 5 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.781” from center to center of the first two bolt holes, and 1.187” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 18 lb8.16 kg  N/A 73.21  $65.89 
Add To Cart

8E5531  N/A GRADER END BIT RH/LH  N/A CUTTING EDGE 
N/A Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.375” in length. It takes 5 of a 5/8” X 2 1/4”(625X225) plow bolt and 5 of a 5/8”(625 HEX NUT) hex nut. Bolt hole spacing is 1 5/8" when measured from the edge of the cutting edge to the center of the first hole and 3 3/4" from the center to center of the bolt holes. 
N/A 16.76 lb7.6 kg  N/A 83.21  $74.89 
Add To Cart

8E7078  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on level cut end RH end bit for a D5 Caterpillar Bulldozer. This is .75” thick, 8” wide and 17.875” in length. It takes 4 of a 3/4” X 2 3/4” (750X275) plow bolt and 4 of a 3/4” (750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 4.375” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 26 lb11.79 kg  N/A 94.02  $84.62 
Add To Cart

8E7079  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on level cut end LH end bit for a D5 Caterpillar Bulldozer. This is .75” thick, 8” wide and 17.875” in length. It takes 4 of a 3/4” X 2 3/4” (750X275) plow bolt and 4 of a 3/4” (750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 4.375” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 26 lb11.79 kg  N/A 94.02  $84.62 
Add To Cart

8E9378  N/A LEVEL CUT END BIT LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 8” wide and 18.50” in length. It takes 4 of a 3/4” X 2 1/2”(750X250) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 3.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 36.16 lb16.4 kg  N/A 77.94  $70.15 
Add To Cart

8E9379  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 8” wide and 18.50” in length. It takes 4 of a 3/4” X 2 1/2”(750X250) plow bolt and 4 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3” from center to center of the bolt holes, and 3.88” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 36.16 lb16.4 kg  N/A 77.94  $70.15 
Add To Cart

8J6412  N/A LEVEL CUT END BIT RH OR LH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D3 Caterpillar Bulldozer. This is a level cut right hand or left hand end bit that is .75” thick, 6.5” wide and 13” in length. It takes 3 of a 5/8” X 2 ¼” (625X225) plow bolt and 3 of a 5/8” (625 HEX NUT) hex nut. The bolt hole spacing is 2.5” from center to center of the bolt holes, and 4” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 4T6229  N/A 15.87 lb7.2 kg  N/A 41.66  $37.49 
Add To Cart

8J8116  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 3G8302  N/A 57.54 lb26.1 kg  N/A 222.44  $200.20 
Add To Cart

8J8117  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 19 7/8" long, 10" wide and 1 1/8" thick; takes 9  100x400 plow bolts and 9  100 hex nuts; Use Item # 3G8301  N/A 57.54 lb26.1 kg  N/A 222.44  $200.20 
Add To Cart

9J1477  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 18 7/8" long, 10" wide, and 1 1/8" thick; takes 9  100x300 plow bolts and 9  100 hex nuts  N/A 57.31 lb26 kg  N/A 209.11  $188.20 
Add To Cart

9J1478  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 18 7/8" long. 10" wide, and 1 1/8" thick; takes 9  100x300 plow bolts and 9  100 hex nuts  N/A 57.31 lb26 kg  N/A 209.11  $188.20 
Add To Cart

9W1764  N/A GRADER END BIT RH/LH  N/A END BIT 
N/A Caterpillar style bolt on right hand or left hand grader end bits for a 12G Caterpillar Grader. This is a grader end bit that is .625” thick, 6” wide and 18.375” in length. It takes 5 of a 5/8” X 2 1/4”(625X225) plow bolt and 5 of a 5/8”(625 HEX NUT) hex nut. Bolt hole spacing is 1 5/8" when measured from the edge of the cutting edge to the center of the first bolt hole and 3 3/4" from the center to center of the bolt holes. Use Item # 8E5531 
N/A 16.76 lb7.6 kg  N/A 83.21  $74.89 
Add To Cart

9W1875  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8  750x300 plow bolts and 8  750 hex nuts  N/A 56.44 lb25.6 kg  N/A 194.84  $175.36 
Add To Cart

9W1876  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit that is 18 1/4" long, 8 1/2" wide and 1 1/8" thick; takes 8  750x300 plow bolts and 8  750 hex nuts  N/A 56.44 lb25.6 kg  N/A 194.84  $175.36 
Add To Cart

9W4491  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9  125 X 400 plow bolts and 9  125 hex nuts; Use Item # 8E4545  N/A 258.82 lb117.4 kg  N/A 1441.36  $1,297.22 
Add To Cart

9W4492  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit for a D10 or a D11 that is 32 3/8" long, 16 1/4" wide, and 2" thick; takes 9  125 X 400 plow bolts and 9  125 hex nuts; Use Item # 8E4546  N/A 258.82 lb117.4 kg  N/A 1441.36  $1,297.22 
Add To Cart

9W6192  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4197 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

9W6193  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D9 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 16” wide and 24” in length. It takes 7 of a 1” X 3 1/4” (100X325) plow bolt and 7 of a 1” (100 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 3.56” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4196 
N/A 154.32 lb70 kg  N/A 349.88  $314.89 
Add To Cart

9W6194  N/A LH END BIT  N/A END BIT  N/A Caterpillar style left hand end bit for D89 doziers; Use Item # 8E4540  N/A 157.24 lb71.32 kg  N/A 622.79  $560.51 
Add To Cart

9W6195  N/A RH END BIT  N/A END BIT  N/A Caterpillar style right hand end bit for D89 doziers; Use Item # 8E4539  N/A 157.24 lb71.32 kg  N/A 622.79  $560.51 
Add To Cart

9W6196  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped right hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4199 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

9W6197  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D10 Caterpillar Bulldozer. This is a hot cupped left hand end bit that is 2” thick, 19” wide and 29” in length. It takes 7 of a 1 1/4” X 4 1/2” (125X450) plow bolt and 7 of a 1 1/4” (125 HEX NUT) hex nut. The bolt hole spacing is 7” from center to center of the first two bolt holes, and 3” from the 2^{nd} to 3^{rd} bolt hole and 3.13” when measured from the edge of the bucket cutting edge to the center of the first hole. Use Item # 8E4198 
N/A 254.19 lb115.3 kg  N/A 514.18  $462.76 
Add To Cart

9W6198  N/A HOT CUPPED END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped left hand end bit that is 1 3/8” thick, 13” wide and 24” in length. It takes 7 of a 7/8” X 2 3/4”(750X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of holes bolt hole spacing is 3”. 
N/A 111.33 lb50.5 kg  N/A 217.12  $195.41 
Add To Cart

9W6199  N/A HOT CUPPED END BIT RH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D7 Caterpillar Bulldozers. This is a hot cupped right hand end bit that is 1 3/8” thick, 13” wide and 24” in length. It takes 7 of a 7/8” X 2 3/4”(750X275) plow bolt and 7 of a 7/8”(875 HEX NUT) hex nut. The bolt hole spacing is 4” from center to center of the bolt holes, and 2.88” when measured from the edge of the bucket cutting edge to the center of the first hole. The second row of holes bolt hole spacing is 3”. 
N/A 111.33 lb50.5 kg  N/A 217.12  $195.41 
Add To Cart

9W8874  N/A LEVEL CUT END BIT RH  N/A END BIT  N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut right hand end bit that is 1” thick, 10” wide and 18.375” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole.  N/A 44.09 lb20 kg  N/A 91.39  $82.25 
Add To Cart

9W8875  N/A LEVEL CUT END BIT LH  N/A END BIT 
N/A Caterpillar style bolt on end bit for a D5 Caterpillar Bulldozer. This is a level cut left hand end bit that is 1” thick, 10” wide and 18.375” in length. It takes 6 of a 3/4” X 2 1/2”(750X250) plow bolt and 6 of a 3/4”(750 HEX NUT) hex nut. The bolt hole spacing is 3.19” from center to center of the bolt holes, and 2.25” when measured from the edge of the bucket cutting edge to the center of the first hole. 
N/A 44.09 lb20 kg  N/A 91.39  $82.25 
Add To Cart
